Fujitsu PRIMERGY RX2530 M4, Upgrade And Maintenance Manual, Page: 151 / 470

RX2530 M4
Upgrade and Maintenance Manual 151
Hard disk drive (HDD) / solid state drive (SSD)
7.4.3 Configuration with up to 10 HDD/SSD modules
I
SAS HDDs must not be populated above or below BC-SAS / BC-SATA
HDDs. In order to avoid this configuration, please make a free bay
intentionally.
For example, if only one SAS HDD or one BC-SAS / BC-SATA HDD is
ordered, this HDD will be installed in position 0 and position 1 will not be
used.
SAS HDDs and BC-SAS / BC-SATA HDDs can be mixed as long as SAS
HDDs are not populated above or below BC-SAS / BC-SATA HDDs.
The same kind of HDDs can be populated above or below each other.
Configuration with up to 10 HDD/SSD modules
Figure 68: Configuration with up to 10 HDDs/SSDs
Position Logical drive number ServerView RAID Manager display name
[0]
0 Vendor Product (0)
[1]
1 Vendor Product (1)
[2]
2 Vendor Product (2)
[3]
3 Vendor Product (3)
[4]
4 Vendor Product (4)
[5]
5 Vendor Product (5)
[6]
6 Vendor Product (6)
[7]
7 Vendor Product (7)
[8]
8 Vendor Product (8)
[9]
9 Vendor Product (9)