Fujitsu PRIMERGY PG-R1CK2, User Manual

Page: 39 / 71

iv
Do not place this system in a humid, dusty, oily, or
smoky area. Do not place this system in an area with poor
ventilation nor in an area close to fire or other sources of heat.
When installing or removing the server from the rack, turn off the
server, all peripheral devices, the server monitor module, and
any other the connected devices. Also unplug all power cords.
Failure to do so can lead to electric shock.
Contact your maintenance engineer to install or remove a server
from the rack.
•
Do not expose it to direct sunlight or place near heating
appliances. Do not place this in an area where the tempera-
ture drops below 10
°
C, as this could damage the server. Do
not string the connecting cables in a way that they become
trip hazards. This could damage the server and cause injury.
•
Do not use the server in a salty environment.
•
Do not obstruct the ventilation slots in the equipment. This
could cause overheating and shorten the life of the equip-
ment.
•
Do not string the connecting cables in a way that they
become trip hazards. This could both damage the server
and even be injurious.
•
Do not place the server in areas where strong magnetic
fields are generated, such as near TVs and speakers, as this
could damage the server.
•
Do not block the ventilation on the frontside, the back side,
and the right side. Leave a space of at least 20cm between
the backside of the device and the wall. Poor ventilation
traps the heat and this could lead a fire.
•
Move the unit with care. Shut down all power and disconnect
all cables and peripherals (e.g. mouse, keyboard, etc.). Also
be aware that depending on the hardware options installed,
a rackmount can weight up to 35kg.