background image

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your 
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for 
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any 
spring loaded parts. Before installing, make sure that the supporting surface will support five times the 
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also 
layout all components to ensure that you have all of the required parts before proceeding (see BOM list 
on following page). Use of this product for anything other than its specified use may result in failure or 
personal injury. This product is intended for indoor use only. We recommend using a qualified trades 
person for installation. Use an assistant or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: [email protected]

Revised 15/12/20

01865 767676

[email protected]

www.unicol.com

*Please check model specific details before installing*

AX12P / AX12T / AX15P / AX15T / 

AX15B / AX16P

Screen Size:

 33 - 70”

Guide Max. Weight:

 60kg

Summary of Contents for AX12P






Reviews: