3 Removing hard disk units
7
E
Notes:
Note that when converting the server from a deskside to a rackmount, the bay orientation is
different. The following diagram shows an 5-bay cage as an example to show the bay # and
SCSI ID position before and after conversion.
Make sure to write down the bay # and SCSI ID for each hard disk so they can be properly
reoriented.
1
Remove the hard disk unit bay cover.
Unscrew the two screws on the top of the
cover and open it to the front.
Note: Slightly lift the cover while open-
ing.
Bay 4
ID=3
Bay 3
ID=2
Bay 2
ID=1
Bay 1
ID=0
Bay 5
ID=4
[Front of a deskside model]
Bay 4
ID=3
Bay 3
ID=2
Bay 2
ID=1
Bay 1
ID=0
Bay 5
ID=4
[Front of a rackmount model]
Summary of Contents for PRIMERGY PG-R1CK2
