50
Operating Manual
CX400
S2
Starting up and operation
1
Green/Orange LED:
alternate flashing
Power on and fault
2
ID indicator
Blue LED: flashing
Select mode
2
Blue LED: off
Normal mode
Power-on indicator (green)
Lights up green when the server enclosure is switched ON.
Flashes green if the server node has been switched on and is in
an error state.
ID
ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
CAUTION!
Risk of loss of data!
I
The On/Off button does not disconnect the multi-node server
system from the mains voltage. To disconnect from the
mains completely, remove the power plug(s).
ID
ID button
Lights up (blue) on the front and on the rear of the server when the
ID button is pressed. Both ID indicators are synchronized.
No.
Function
Status
Description
Table 3: Power-on indicator and ID indicator
