CX400 S2
Operating Manual
19
3
Installation steps, overview
This chapter contains an overview of the steps necessary to install your server
enclosure. Links take you to sections where you can find more detailed
information about the respective steps:
Ê
First of all, carefully read the safety instructions in
"Important information" on
page 21
.
Ê
Transport the server enclosure to the place where you want to set it up.
Ê
Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
"Unpacking the server enclosure" on page 36
).
Ê
Make sure that you have all necessary manuals (see
"Documentation
overview" on page 9
); print out the PDF files if required.
Ê
Components that have been ordered additionally may be delivered loose
with the server enclosure. For mounting refer to the original component
documentation.
Ê
Mount the server enclosure into the rack (see
"Installing/removing the server
enclosure in/from the rack" on page 37
).
Ê
Wire the server enclosure. Follow the instructions in sections
"Installing an
additional server node to the server enclosure" on page 39
and
"Notes on
connecting/disconnecting cables" on page 43
.
Ê
Connect the server enclosure to the mains (see section
"Connecting the
server enclosure to the mains" on page 41
).
Ê
Familiarize yourself with the controls and indicators on the front and rear of
the server enclosure (see section
"Controls and indicators" on page 49
).
