Fujitsu PRIMERGY BX600 S3 Hardware Manual Download Page 99

Page: 99 / 103

PRIMERGY BX600 S3 Blade Server System Unit Hardware Guide

6.5.2 Messages Displayed When a Non-durable

Components Life has been Reached

■

The flow of the replacement period notice

■

Messages displayed when the replacement period for non-durable
components has been reached

●

Prior notice

When one year operation time remains until the end of the life time, a notification is sent via Web UI of

a Management Blade.

• Status Display ("Power Supply Live Time Counter" in [System Property] - [Environ./Maintenance] -

[Power Supply]) changes the status from "Healthy". And the message (blue) prompts to contact an

office listed in the "Contact Information" of "Start Guide".

• Eventlog ([System Property] - [System Eventlog]) keeps a record that the remaining life time is one

year.

The remaining time and the days displayed on a log are not correct. Check for the correct time in the

[Power Supply Live Time Counter] in the status display.

• The display in "Fan Units" or "Power Supply Units" in the main window changes from "ok" to

"ok(Pre-Expiry)".

●

Life time notice

When operation time has exceeded the projected life time, a notification is sent via as Web UI of a

Management Blade.

• Status Display ("Power Supply Live Time Counter" in [System Property] - [Environ./Maintenance] -

[Power Supply]) shows the message (red) prompts to contact an office listed in the "Contact

Information" of "Start Guide".

• Eventlog ([System Property] - [System Eventlog]) keeps a record that the life time has been

exceeded.

• The display in "Fan Units" or "Power Supply Units" in the main window changes from "ok" to

"ok (Expiry)".

Normal status

Life time notice

Contact a maintenance
support office and
check the
"Contact Check Box" (*)

Prior notice

Replace
non-durable
components

1 year of operation
time remaining

Click [Reset]

Component has exceeded
the projected lifetime

*: Display [System Property] - [Environ./Maintenance] - [Power Supply] via Web UI of

a Management Blade, and check the applicable box in "Power Supply Live Time Counter".

If the box is checked, it can only be unchecked by clicking [Reset].

Summary of Contents for PRIMERGY BX600 S3








































































































Search results

Summary of Contents for PRIMERGY BX600 S3

Reviews:

Related manuals for PRIMERGY BX600 S3

Brands by name

Popular brands

Fujitsu PRIMERGY BX600 S3, Hardware Manual

Search results

Summary of Contents for PRIMERGY BX600 S3

Reviews:

Related manuals for PRIMERGY BX600 S3

Brands by name

Popular brands