Fujitsu PRIMERGY BX600 S3 Hardware Manual Download Page 24

Page: 24 / 103

Chapter 3 Standard Operations

3.3 Turning Off the Server

Exit the OS operating on each Server Blade.

After exiting the OS the power of the Server Blade automatically turns off and the Server blade

power LED is lit in amber.

If the Server Blade power does not turn off even

after exiting the OS, confirm that the hard disk

access LED is not lit and then press the Server

blade power switch.

Press the main power switch on the front of the Chassis.

Press the switch until the main power supply

LED of the Chassis turns off.

• Follow the procedure below to turn off the server. Data can be lost if this procedure is not

followed correctly.

• In the event of smoke or sparks, immediately unplug the power plug from the outlet.

Failure to do so may lead to a fire or electric shock.

• Be sure to wait for 10 seconds or longer after Server Blade shutdown before turning

the server on. If the power is turned on straight after shutdown, it may cause a server

error or failure.

• Wait for 20 seconds before removing the Server Blade from the Chassis or unplugging

the Chassis power cable after Server Blade shutdown.

• Be sure to wait for 10 seconds or longer after shutdown before turning the server on. If

the power is turned on straight after shutdown, it may cause a server error or failure.

• Be sure to wait at least 30 seconds before removing power cables after turning off the

main power.

Server blade
power LED
turns amber

Server blade power switch

Main power LED
turns off

Main power switch

Summary of Contents for PRIMERGY BX600 S3








































































































Search results

Summary of Contents for PRIMERGY BX600 S3

Reviews:

Related manuals for PRIMERGY BX600 S3

Brands by name

Popular brands

Fujitsu PRIMERGY BX600 S3, Hardware Manual

Search results

Summary of Contents for PRIMERGY BX600 S3

Reviews:

Related manuals for PRIMERGY BX600 S3

Brands by name

Popular brands