Fujitsu PRIMERGY BX600 S3 Hardware Manual Download Page 26

Page: 26 / 103

Chapter 3 Standard Operations

3.4 Inserting and Ejecting a Floppy

Disk

Inserting and ejecting a floppy disk is described below.

3.4.1 Cautions

Note the following points when handling floppy disks.

• Do not expose the floppy disk to any fluids.

• Do not open the shutter of the floppy disk and touch the disk surface.

• Do not bend the floppy disk or place heavy objects on it.

• Do not expose the floppy disk to strong magnetic fields.

• Do not drop the floppy disk on hard surfaces.

• Do not store the disk in extremely hot or cold conditions.

• Do not put layers of labels on the floppy disk.

• Keep the floppy disk away from condensation or water droplets.

Summary of Contents for PRIMERGY BX600 S3








































































































Search results

Summary of Contents for PRIMERGY BX600 S3

Reviews:

Related manuals for PRIMERGY BX600 S3

Brands by name

Popular brands

Fujitsu PRIMERGY BX600 S3, Hardware Manual

Search results

Summary of Contents for PRIMERGY BX600 S3

Reviews:

Related manuals for PRIMERGY BX600 S3

Brands by name

Popular brands