U41644-J-Z816-5-76
A-11
Laufende K/F 1
(2)
Rack depth conditions
The PRIMEQUEST 520A*/520/420 unit is mounted with slide rails (which come
with the PRIMEQUEST 520A*/520/420) in a rack. Therefore, the rack must satisfy
the conditions specified below as follows: (1) rack depth measured as the distance
between the front and rear columns; (2) distance between the inside surface of the
front rack cover and the front face of the front columns; and (3) distance between the
front face of the front columns and the inside surface of the rear rack cover.
Note:
To perform maintenance work from one of the sides, the front cover may
need to be removed or other measures may need to be taken, depending on
the thickness of the front cover or the angle of the cover when open.
Figure A.6 Rack depth conditions
*: not supported by Fujitsu Technology Solutions
Front
Front cover (note)
Columns
Columns
Rear cover
(2) Distance between inside
surface of front rack cover
and front face of front
columns:
40 to 90 mm (1.6 to 3.5 in.)
(3) Distance between front face of front columns and
inside surface of rear rack cover: 935 mm (36.8 in.)
or more
(1) Permissible distance between columns: 690 to 750 mm
(27 to 31 in.)