2-6
Using Point 510/Point 1600 Connectivity Peripherals
Port Replicator
2
Peripheral connectors on the port replicator are described in Table 2-2.
Note:
The ability of the pen tablet to utilize these ports is determined by BIOS
configuration settings. Contact your local help desk or reseller if you suspect that
your pen tablet’s BIOS settings are preventing peripheral devices from working
properly.
Table 2-2. Port Replicator Peripheral Connectors
Port
Description
Serial Port A
This connector can be used to connect an external
device with a serial interface such as a modem. This
is a fully-functional RS232-C serial port.
Serial Port B
This connector can be used to connect an external
device with a serial interface. Note the following:
1) This port provides only the Rx and Tx (receive and
transmit) signals of the RS232-C interface.
2) When this port is enabled, the IrDA port on the pen
tablet is disabled.
Parallel Port
This connector can be used to connect a device with
a parallel interface such as a parallel printer.
Floppy Disk
Drive Port
This connector can be used to connect the Fujitsu
FMWFD2 floppy disk drive.
Mouse Port
This connector can be used to connect a PS/2-style
mouse.
Video Port
This connector allows you to connect an external
SVGA monitor. Note that an external monitor and the
pen tablet display screen can be viewed
simultaneously with the Point 1600 pen tablet, but not
with the Point 510.
DC Input
This connector can be used to connect the Point 510/
Point 1600 AC adapter or auto adapter.
Keyboard Port
This 6-pin mini-DIN plug can be used to attach a
PS/2-style keyboard.
Summary of Contents for Point 1600
