Fujitsu Point 1600 User Manual Download Page 25 | Manualshive

Page: 25 / 56

background image

Portable Port Expander

2-5

7.

Turn on the peripheral devices attached to the portable port expander.

8.

Start the pen tablet or, if you suspended the pen tablet, resume system
operation.

Note:

If the required driver software for an attached peripheral device is not installed,
the device may not work or may work incorrectly. Contact your local help desk or
refer to the documentation provided with your peripheral device and install the
driver software at this time.

You can now use your pen tablet with the peripheral devices attached to the portable
port expander.

Note the following when using the portable port expander:

• The ability of the pen tablet to utilize ports on the portable port expander is

determined by BIOS configuration settings. Contact your local help desk or
reseller if you suspect that your pen tablet’s BIOS settings are preventing the
portable port expander from working properly.

• Point 510 only: Due to the size and location of the portable port expander when

attached to the pen tablet, the portable port expander blocks the IrDA port on the
bottom of the Point 510 pen tablet. Therefore, the IrDA port is inoperable when
the portable port expander is attached. Also, note that serial port B and the IrDA
port share the same system resources, so the IrDA port is unavailable if your
system is configured to use serial port B.

Disconnecting the Portable Port Expander

2

To disconnect the portable port expander from your pen tablet,

1.

Suspend or shut down and turn off the pen tablet.

2.

Turn off peripheral devices that are attached to the portable port expander.

3.

Push the latch handle on the portable port expander to the right to unlock it
from the pen tablet.

4.

Pull the portable port expander out of the pen tablet’s system interface port in a
straight line. Do not rock the components as you pull them apart.

You can now start the pen tablet or, if you suspended the pen tablet, you can now
resume system operation.

«
...
23
24
25
26
27
...
»

Summary of Contents for Point 1600

























































Reviews:

No comments

Related manuals for Point 1600

Brand: Kathrein Pages: 16

Brand: Wacom Pages: 180

Brand: Vestax Pages: 12

Brand: Starmobile Pages: 41

Brand: Apollo Pages: 50

Brand: KOCASO Pages: 20

Brand: Technics Pages: 20

Brand: Global Phoenix Pages: 41

Brand: Nevir Pages: 24

Brand: Panasonic Pages: 28

Brand: Mitsubishi Electric Pages: 12

Brand: Serioux Pages: 111

Brand: Sony Pages: 2

Xperia Tablet SGPT123US/S

Brand: Sony Pages: 2

Xperia Tablet S Series

Brand: Sony Pages: 2

Xperia SGPT121US/S

Brand: Sony Pages: 3

Xperia Tablet Z GP311

Brand: Sony Pages: 12

Xperia Z2 SGP511

Brand: Sony Pages: 111

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands