Fujitsu Point 1600, User Manual

Page: 21 / 56

2-1
Chapter 2
Using Point 510/Point 1600 Connectivity Peripherals
This chapter provides details on using Point 510 and Point 1600 connectivity
peripherals.
Caution
Although the circuitry in the Point 510 and Point 1600 pen tablets and
connectivity peripherals is designed to be robust, the pen tablet and connected
devices can be damaged if procedures given in these instructions are not
followed when connecting peripheral devices.
To avoid damaging your hardware, observe the following guidelines when using
your connectivity peripherals:
• Do not touch connector pins or connector sockets on your equipment.
Electrostatic discharge (ESD) can damage interface circuitry in your
equipment.
• Do not connect or disconnect any peripheral device when the system is
running or when the peripheral device is turned on. Always turn off peripheral
devices and either shut down and turn off the pen tablet or suspend system
operation before connecting to or disconnecting from peripheral devices.
• Interfaces on the pen tablet are duplicated on connectivity peripherals. Do
not use corresponding connectors on the pen tablet and your connectivity
peripheral simultaneously. Connecting peripheral devices to equivalent
connectors on the pen tablet and connectivity peripherals at the same time
can damage equipment.
• Do not jam or force component connections.