Fujitsu Point 1600, Installation Manual

Page: 34 / 52

2-18 Assembling and Installing Connectivity Peripherals
utilize these ports is determined by BIOS settings. Ensure that BIOS options are properly configured for
the ports that you intend to use.
* Because of its modular design, the port replicator is equipped with two mouse ports. Only
one mouse device should be connected at a time.
Table 2-4. High-Connectivity Cradle Connectors
Port Description
Serial Port A This connector can be used to connect an external device with a serial interface
such as a modem. This is a fully-functional RS232-C serial port.
Serial Port B This connector can be used to connect an external device with a serial interface.
Note the following:
1) This port provides only the Rx and Tx (receive and transmit) signals of the
RS232-C interface. 2) When this port is enabled, the IrDA port on the pen tablet is
disabled.
Parallel Port This connector can be used to connect a device with a parallel interface such as a
parallel printer.
Floppy Disk
Drive Port This connector can be used to connect the Fujitsu FMWFD2 floppy disk drive.
Mouse Port
*
(on portable
port expander)
This connector can be used to connect a PS/2-style mouse. When used with the
Point 1600 pen tablet, this connector can be connected to either a PS/2-style
keyboard or mouse.
Video Port This connector allows you to connect an external SVGA monitor.
Point 1600 pen tablet users: Note that an external monitor and the pen tablet
display screen cannot be viewed simultaneously.
DC Input This connector can be used to connect the AC adapter or auto adapter.
Keyboard Port This connector can be used to attach a PS/2-style keyboard.
Mouse Port
*
(on cradle
module)
This connector can be used to connect a PS/2-style mouse.