background image

- 24 -

GA-8ST Motherboard

English

z

z

z

z

z

Integrated Peripherals

This setup page includes all onboard peripherals.

z

z

z

z

z

Power Management Setup

This setup page includes all the items of Green function features.

z

z

z

z

z

PnP/PCI Configurations

This setup page includes all the configurations of PCI & PnP ISA resources.

z

z

z

z

z

PC Health Status

This setup page is the System auto detect Temperature, voltage, fan, speed.

z

z

z

z

z

Frequency/Voltage Control

This setup page is control CPU’s clock and frequency ratio.

z

z

z

z

z

Load Fail-Safe Defaults

Fail-Safe Defaults indicates the value of the system parameters which the system would
be in safe configuration.

z

z

z

z

z

Load Optimized Defaults

Optimized Defaults indicates the value of the system parameters which the system would
be in best performance configuration.

z

z

z

z

z

Set Supervisor password

Change, set, or disable password. It allows you to limit access to the system and Setup,
or just to Setup.

z

z

z

z

z

Set User password

Change, set, or disable password. It allows you to limit access to the system.

z

z

z

z

z

Save & Exit Setup

Save CMOS value settings to CMOS and exit setup.

z

z

z

z

z

Exit Without Saving

Abandon all CMOS value changes and exit setup.

This Manual: http://www.manuallib.com/file/2597476

Summary of Contents for P4 Titan-DDR GA-8STXC













































Reviews: