- 17 -
GA-8STXC Motherboard
English
8) IDE1 / IDE2 (IDE1 / IDE2 Connector)
Important Notice:
Please connect first hard disk to IDE1 and
connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the
same side with the Pin1.
IDE2
IDE1
1
1
9) DIMM_LED
Do not remove memory modules while
DIMM LED is on. It might cause short or other
unexpected damages due to the 2.5V stand
by voltage. Remove memory modules only
when STR function is disabled by jumper and
AC Power cord is disconnected.
10) BAT (Battery)
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
+
_
+
This Manual: http://www.manuallib.com/file/2597476
