- 20 -
GA-8STXC Motherboard
English
16) S_IRQ (Serial IRQ Connector)
Signal
GND
1
This connector is for special design,
for example: PCMCIA add on card.
1
VCC(+5V)
IR Data Input
GND
17) IR
Please make sure that pin 1 on the IR device
is align with pin 1 of the connector. To enable
the IR function on the board, you are required
to purchase an option IR module. For more
detail information please contact your nearest
dealer for optional IR device.
N C
IR Data Output
19) CLR_CMOS (Clear CMOS)#
1-2 close: Normal
You may clear the CMOS data to its default
values by this jumper. To clear CMOS, tem-
porarily short 1-2 pin.
1
2-3 close: Clear CMOS
1
18) CI (CASE OPEN)
This 2 pin connector allows your system to
enable or disable the system alarm if the
system case begin remove.
1
Signal
GND
This Manual: http://www.manuallib.com/file/2597476
