- 18 -
Hardware Installation Process
English
11) F_PANEL (2x9 Pins Connector)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your
chassis front panel to the F_PANEL connector according to the pin assignment above.
GN (Green Switch)
Open: Normal Operation
Close: Entering Green Mode
G (Green LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
H (IDE Hard Disk Active LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
SPK (Speaker Connector)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
RST (Reset Switch)
Open: Normal Operation
Close: Reset Hardware System
PW (Soft Power Connector)
Open: Normal Operation
Close: Power On/Off
P+ / P- / P- (Power LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 3: LED cathode(-)
1
GN+
G+
PW
P+
P-
P-
H+
GN-
G-
RST
SPK
H-
2
17
18
1
1
1
1
This Manual: http://www.manuallib.com/file/2597476
