39
Recovery of Instant MyMedia
If Instant MyMedia does not start, or does not work properly, the problems may be solved by
returning the notebook to the status when purchased by means of performing an Instant
MyMedia recovery.
Execute the recovery of Instant MyMedia
1.
Turn off your notebook and locate the [F12] key on the keyboard. Be ready to press this
key immediately after you turn on the notebook.
2.
Press the power button and press the [F12] key as soon as the Fujitsu logo appears. The
Boot Menu will appear.
3.
Insert the Restore DVD in your drive. Wait approximately 10 seconds so the disc can be
identified, then proceed to the next step.
4.
Press the cursor down key to select “CD-ROM drive” and press the [Enter] key.
5.
Using the cursor keys, select “Restore the Instant MyMedia” and press the [Enter] key.
6.
Following the instruction in the screen, eject the Restore DVD and insert the Instant
MyMedia Restore disc.
7.
Press the [Y] key. A message showing “Restore is in process” is displayed, and your note-
book will start copying files.
8.
When restore is complete, a message appears prompting you to remove the Restore disc.
Remove the disc and press the [Y] key. The system will reboot.
• Use of the recovery of Instant MyMedia enables the setting of current channels
to be deleted.
• To recover Instant MyMedia, you will need to use the Restore DVD and the
Instant MyMedia recovery disc.
If you don’t press the [F12] at the proper time, Windows will start. Turn off the
notebook, and proceed again from step 1.
If the recovery menu is not displayed, eject the disc to check that a proper disc is
installed. After checking, press the [Delete] key while pressing the [Ctrl] key and
the [Alt] key to restart the notebook.
If you select “Restore Hard Disk to Original State” or “Delete All Data on the Hard
Disk,” the data saved in the notebook will be erased. If you mistakenly select these,
press the [N] on the following screen to stop the recovery.
TVTuner.book Page 39 Friday, October 8, 2004 1:32 PM
