Fujitsu MHN2100AT - Mobile 10 GB Hard Drive, Product Manual

Page: 146 / 236

Interface
5-70 C141-E120-02EN
•
Data format version number
The data format version number indicates the version number of the data
format of the device attribute values or insurance failure thresholds. The data
format version numbers of the device attribute values and insurance failure
thresholds are the same. When a data format is changed, the data format
version numbers are updated.
•
Attribute ID
The attribute ID is defined as follows:
Attribute ID Attribute name
0 (Indicates unused attribute data.)
1 Read Error Rate
2 Throughput Performance
3 Spin Up Time
4 Start/Stop Count
5 Reallocated Sector Count
7 Seek Error Rate
8 Seek Time Performance
9 Power-On Hours Count
10 Spin Retry Count
12 Drive Power Cycle Count
192 Emergency Retract Cycle Count
193 Load/Unload Cycle Count
194 HDA Temperature
196 Reallocated Event Count
197 Current Pending Sector Count
198 Off-Line Scan Uncorrectable Sector Count
199 Ultra ATA CRC Error Count
200 Write Error Rate
203 Run Out
•
Status Flag
Bit Meaning
0 If this bit 1, it indicates that if the attribute exceeds the threshold,
it is the attribute covered by the drive warranty.
1 If this bit is 1 (0), it indicates the attribute only updated by an on-
line test (off-line test).
2 If this bit 1, it indicates the attribute that represents performance.