Fujitsu LIFEBOOK T734 Operating Manual Download

Page: 82 / 163

Connecting external devices

Connecting USB devices

USBports

On the USB ports, you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).

USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.

USB 1.x has a maximum data transfer rate of 12 Mbps.

USB 2.0 has a data transfer rate of up to 480 Mbps.

USB 3.0 has a data transfer rate of up to 5 Gbit/s.

Additional information can be found in the documentation for the USB devices.

►

Connect the data cable to the
external device.

►

Connect the data cable to a USB
port of the notebook.

Device drivers

USB devices will be automatically recognized and installed by your operating system.

Fujitsu

Summary of Contents for LIFEBOOK T734




































































































































































Search results

Summary of Contents for LIFEBOOK T734

Reviews:

Related manuals for LIFEBOOK T734

Brands by name

Popular brands

Fujitsu LIFEBOOK T734, Operating Manual

Search results

Summary of Contents for LIFEBOOK T734

Reviews:

Related manuals for LIFEBOOK T734

Brands by name

Popular brands