Fujitsu LIFEBOOK T734 Operating Manual Download

Page: 64 / 163

Working with the notebook

Optional wireless LAN / Bluetooth / 4G
wireless components

The installation of radio components not approved by Fujitsu will invalidate
the certi

cations issued for this device.

Depending on the device con

guration you ordered, your device will be

equipped with wireless LAN, Bluetooth and/or 4G.

Switching the wireless components on and off

Before switching on your device for the

rst time, the on/off button for

radio components must be in the "ON" position.

►

Slide the ON/OFF button into the "ON"
position to activate the radio components.

wireless LAN

Bluetooth

►

Slide the ON/OFF button to the
"OFF" position to deactivate the
radio components.

If you switch off the radio components, the wireless LAN antenna and, when present,
the Bluetooth module and 4G/LTE module will be switched off.

You can also deactivate the wireless components individually in the

BIOS Setup

. For

this to occur, you must either not have assigned a supervisor HDD password or if a
supervisor HDD password has been assigned, you must know this password.

Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.

Details on using wireless LAN can be found in the online help system
included in the wireless LAN software.

You can

nd more information on how to use Bluetooth on the CD you

received with your Bluetooth software.

You can obtain more information on 4G from your service provider.

Fujitsu

Summary of Contents for LIFEBOOK T734




































































































































































Search results

Summary of Contents for LIFEBOOK T734

Reviews:

Related manuals for LIFEBOOK T734

Brands by name

Popular brands

Fujitsu LIFEBOOK T734, Operating Manual

Search results

Summary of Contents for LIFEBOOK T734

Reviews:

Related manuals for LIFEBOOK T734

Brands by name

Popular brands