Fujitsu LIFEBOOK T734 Operating Manual Download

Page: 75 / 163

Security functions

Changing the supervisor or user HDD password

You can only change the supervisor HDD password when you have logged into the

BIOS Setup Utility

with the supervisor HDD password.

Password

Supervisorpassword

Userpassword

►

Call the

BIOS Setup Utility

and go to the

Security

menu.

►

When changing the password, proceed exactly as for password assignment.

Removing passwords

To remove a password (without setting a new password) perform the following steps:

Password

Supervisorpassword

Userpassword

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

►

Highlight the

Set Supervisor Password

Set User Password

eld and press the Enter key.



You will be requested to enter the current password by the

Enter Current Password

prompt.

You will be requested to enter a new password by the

Enter New Password

prompt.

►

Press the Enter key twice.

►

In the

Exit

menu, select the option

Save Changes & Exit

►

Select

Yes

and press the Enter key.



The notebook will now reboot with the password removed.
Removing the supervisor HDD password simultaneously deactivates the user HDD password.

Password protection for booting of the operating system

With the supervisor HDD password you have set in the

BIOS Setup Utility

(see section

"Setting supervisor and user HDD password", Page 72

), you

can also prevent booting of the operating system.

Operating system

Activating system protection

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

Operatingsystem

►

Select the

Password on Boot

option and press the Enter key.

►

Select the desired option (

Disabled

First Boot

Every Boot

) and press the Enter key

►

Select the

Save Changes & Exit

option under

Exit



The notebook will reboot. You will be prompted to enter your password
(the supervisor HDD password).

Deactivating system protection

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

Operatingsystem

►

Select the

Password on Boot

option and press the Enter key.

►

Select the

Disabled

option and press the Enter key.



If you do not want to change any other settings, you can exit

BIOS Setup Utility

►

Select the

Save Changes & Exit

option under

Exit



The notebook will reboot. The system is no longer password-protected.

Fujitsu

Summary of Contents for LIFEBOOK T734




































































































































































Search results

Summary of Contents for LIFEBOOK T734

Reviews:

Related manuals for LIFEBOOK T734

Brands by name

Popular brands

Fujitsu LIFEBOOK T734, Operating Manual

Search results

Summary of Contents for LIFEBOOK T734

Reviews:

Related manuals for LIFEBOOK T734

Brands by name

Popular brands