Working with the notebook
Setting up the port replicator
Select a suitable location for the port replicator before setting it up.
Follow the instructions below when doing so:
•
Never place the port replicator on a soft surface (e.g. carpeting, upholstered furniture, bed).
This can block the air vents of the notebook and cause overheating and damage.
•
Place the port replicator on a stable,
fl
at and non-slip surface. Please note that the
port replicator’s rubber feet may mark certain types of surface.
•
Never place the port replicator and the AC adapter on a heat-sensitive surface.
•
Do not expose the port replicator to extreme environmental conditions.
Protect the port replicator from dust, humidity and heat.
Connect the notebook to the port replicator
The port replicator supports various LIFEBOOK models. The adjusting lever of the port
replicator can be used to adapt the port replicator to the size of the particular LIFEBOOK.
Before connecting the notebook to the port replicator, check if the setting
lever of the port replicator is in the right position. If necessary, adjust
the setting lever to the correct position.
►
Disconnect the AC adapter cable from the DC socket (DC IN) of the notebook.
66
Fujitsu
