Fujitsu LIFEBOOK T725 Operating Manual Download

Page: 131 / 138

Appendix

Recovering Your Recovery Image Using Recovery and Utility
(for new hard drive or non-bootable hard drive)

If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.

Note: You will need the Bootable disk and Recovery Image disk set for this recovery.

1. Power on your system. When the Fujitsu logo appears on the screen, press the

Enter

key.

2. Insert the bootable disk in your DVD drive, then click

3. Highlight the CD/DVD option from the Boot Menu and press

Enter

4. Select CD/DVD boot mode: Select UEFI Mode, if applicable and press

Enter

While the

les are being loaded from the disk, the Fujitsu logo screen appears

followed by a progress bar at the bottom of the screen.

5. Choose your language, if necessary.
6. Three tool options appear:

Diagnostics

Recovery

and

Utility

. Select

Recovery

•

For Windows 8.1: Select

Restore full hard drive

•

For Windows 7: Select

Restoring the Factory Image (full hard drive recovery)

7. Click

Next

to con

rm full hard drive restoration. All data on HDD will be deleted.

8. Agree to EULA by selecting

Agree

option and clicking

Next

9. Click

Next

on the Recovery Disk Check screen to verify that the bootable

disk has been inserted into the optical drive.

10. The

Checking for Recovery Dis

k screen appears followed by the prompt to insert the

rst disk. Click

to continue. Repeat this step for all disks. After all recovery disks

have been checked and the check has been completed, click

Next

11. Follow the prompt to reinsert the

rst recovery disk and click

Next

12. Click

when you receive the

nal warning informing you that all data on drive

C will be lost. This starts the recovery process.

13. Follow the prompts to insert the next recovery disks and click

14. After the copying of the image to the HDD completes the restore process is

complete, click

Finish

to restart the system. The computer will restart automatically

and then go through the

rst boot process.

15. Follow the steps listed in “Auto Installation support for essential access

software from backup location” section.

16. Download FSDM (Fujitsu Software Download Manager) from support site and download

all the software applicable to the model and OS using FSDM.

17. Follow the steps listed in “Auto Installation support for essential access

software downloaded from support website.

Fujitsu

129

Summary of Contents for LIFEBOOK T725











































































































































Search results

Summary of Contents for LIFEBOOK T725

Reviews:

Related manuals for LIFEBOOK T725

Brands by name

Popular brands

Fujitsu LIFEBOOK T725, Operating Manual

Search results

Summary of Contents for LIFEBOOK T725

Reviews:

Related manuals for LIFEBOOK T725

Brands by name

Popular brands