Fujitsu LIFEBOOK T725 Operating Manual Download

Page: 84 / 138

Connecting external devices

Connecting an external SATA hard drive (eSATA)
(port replicator only)

The notebook itself does not have an eSATA port. The port replicator which is
available as an option for your notebook offers you this type of port.

An external SATA hard disk can be connected at the eSATA port. This allows you
to expand the internal hard disk capacity as you wish.

The length of the eSATA cable must not exceed 2 meters. Seek advice from a specialty
store as to which eSATA data cable is suitable for your external eSATA hard disk.
Note that the hard drive has its own external power supply available.

The data transfer rate is up to 2,400 Mbps.

eSATA

►

Connect the data cable to the external
device.

►

Connect the data cable to the eSATA port.

Device drivers

The eSATA hard disk is automatically recognized by your operating system and installed.

You will

nd more information in the documentation for the external SATA

hard disk and the operating system.

Safe removal of eSATA and USB devices

Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.

►

Click on the symbol for safe removal of hardware with the left mouse button.

►

Select the device you wish to shut down and remove.

►

Press the "Enter" key.

Wait for the dialog box which tells you that it is now safe to remove the device.

Fujitsu

Summary of Contents for LIFEBOOK T725











































































































































Search results

Summary of Contents for LIFEBOOK T725

Reviews:

Related manuals for LIFEBOOK T725

Brands by name

Popular brands

Fujitsu LIFEBOOK T725, Operating Manual

Search results

Summary of Contents for LIFEBOOK T725

Reviews:

Related manuals for LIFEBOOK T725

Brands by name

Popular brands