Appendix
RECOVER YOUR SYSTEM WHEN THE HARD
DRIVE IS NOT BOOTABLE
Restore the Recovery Image for Full Hard Drive
Follow the steps in the “Recovering your Recovery Image using Recovery and
Utility (for new hard drive or non-bootable hard drive)” section. You will need the
Bootable Disk and the Recovery Disk Set for this task.
Utility tool: If applicable for your region, the Utility tool contains two options:
Hard Disk Data Delete and Partition Creation.
The Hard Disk Data Delete utility is used to delete all data on the hard disk
and prevent the data from being reused.
NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain
that you want to erase your entire hard disk, including all partitions.
To delete hard disk data:
1. Click the
Hard Disk Data Delete
button. The progress bar appears, followed by the EULA screen.
2. Agree to the EULA and click
Next
.
3. Choose the hard disk from which the data should be deleted in the list of hard disks and click
Next
.
The Partition Creation utility is used to change the C: and D: drive partition sizes.
To run this utility: (This is not an option when using Windows 7.)
1. Click the
Partition Creation
button.
2. A progress bar appears, followed by the EULA screen. Agree to the EULA.
3. On the
Recovery Tool - Partition Creation
screen, move the slider to set disk size, and then click
OK
.
4. Click
Yes
in the
Partition Creation
con
fi
rmation dialog.
WARNING: It is highly recommended that you send your product to Fujitsu
Service to replace a hard drive. A mistake could possibly destroy your
computer, your new hard drive or both.
128
Fujitsu
