71
SECTION 3
Figure 1-2a Main - Primary Master and Primary Slave Menu
1.1.2 Main - Primary Master and Primary Slave Menu
Setup Item
Selections
Note (Item Specific Help)
Type
Auto
None
CD-ROM
ATAPI Removable
User
Select ATA/ATAPI device type. If ‘Auto’ is
selected, the type is automatically identified at
POST by the BIOS. It does not carry out
Cylinder/Head/Sector display in the case of
over 8.4GB-HDD when Auto mode. If ‘None’
is selected, all of the following setup items do
not appear. When ‘User’ is selected, you can
specify Cylinders, Heads and Sectors.
User = you enter parameters of hard-disk drive
installed at this connection.
Auto = autotypes ATA/ATAPI drive installed
here.
CD-ROM = a CD-ROM drive is installed here.
ATAPI Removable = removable disk drive is
installed here.
Multi-Sector
Transfers
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
This option can not be changed when ‘Auto’
is selected.
Specify the number of sectors per block for
multiple sector transfer.
F1
Help
›fl
Select Item
-/Space
Change Value
F9
Setup Defaults
ESC
Exit
‹fi
Select Menu
Enter
Select
:
Sub-Menu
F10
Save and Exit
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power
Boot
Info
Exit
Primary Slave [UJDA310-(PS)]
Type:
[
Auto
]
Multi-Sector Transfers: [Disabled]
LBA Mode Control:
[Disabled]
PIO Transfer Mode:
[Fast PIO 4]
DMA Transfer Mode:
[Disabled]
Item Specific Help
Select ATA/ATAPI
drive installed here.
[Auto]
The BIOS auto-type
the drive on boot
time.
Except [Auto]
You enter parameters
of the drive.
[None]
The drive is disabled.
