55
SECTION 2
Loading/Ejecting a Floppy Disk
This item explains how to load and eject floppy disks.
Insert into the floppy disk drive.
Insert the floppy disk with the label upwards
and the shutter side first until the EJECT
button springs out.
Label
Eject button
Press the EJECT button.
Check that the floppy disk unit’s access lamp
is out, then press the EJECT button.
Access lamp
EJECT button
Critical Point
If you eject the floppy disk while the floppy disk
unit’s access lamp is still on, there is a risk of
losing the data on the disk.
When you do not want to erase the data saved
on the disk, or when you do not want to write
additional data, slide the floppy disk’s Write
enable tab so that the hole is open (WRITE
PROTECT state). When you want to write data
again, slide the Write enable tab so that the
hole is closed.
Write enable tab
WRITE
ENABLE
WRITE
PROTECT
Loading
Ejecting
