manualshive.com logo in svg

Fujitsu LifeBook S-4530, Instructions Manual

Share
Download
Fujitsu LifeBook S-4530 Instructions Manual Download Page 52

44

Removing an Expansion RAM Module

This item explains how to remove an expansion RAM module.

 WARNING

ELECTRIC SHOCK
Always turn off the computer main unit main switch and disconnect the AC adaptor
when removing an expansion RAM module in order to avoid electric shock.

1

Turn off the main switch and
disconnect the AC adaptor.

Slide the main switch in the direction of the
arrow (to the   side).
Disconnect the AC adaptor from the main unit.

Main switch

2

Remove the cover of the expansion
RAM module slot.

Remove the cover of the expansion RAM
module slot on the bottom of the computer
main unit.

Slot cover

3

Remove the expansion RAM module.

Open the hooks on both sides that retain the
expansion RAM module to the left and right,
then remove the expansion RAM module from
the slot.

Expansion RAM
module

hook

4

Fit the cover of the expansion RAM
module slot.

Fit the cover removed in 2.

Slot cover

Summary of Contents for LifeBook S-4530















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands