16
4. Switching on the Power
Switching on the power
This item explains the normal way to switch the computer main unit power on.
Critical Point
When turning on the personal computer connected with an optional FDD unit, check to see
whether a floppy disk is set in the floppy disk drive or not. If there is a floppy disk set in the
drive, be sure to remove it before turning on the computer.
1
Connect the AC adaptor.
First connect the AC power cord to the AC
adaptor (
1
), next connect the other cord of
the AC adaptor to the personal computer’s DC-
IN connector (
2
). Lastly, plug the AC power
cord into an AC outlet (
3
).
1
2
3
AC adaptor
2
Open the LCD panel.
Push the latch to release the lock, then lift the
display panel with your hand.
Latch
3
Switch on the main switch of the
computer main unit.
Power is supplied from the AC adaptor, the
power comes on, and the POST starts. Also,
the
etc. on the status indicator LCD are
displayed.
Main switch
SECTION 1
