manualshive.com logo in svg

Fujitsu LifeBook S-4530, Instructions Manual

Share
Download
Fujitsu LifeBook S-4530 Instructions Manual Download Page 31

SECTION 1

23

Resuming

This personal computer can be resumed by the SUS/RES switch or the cover close switch.

Critical Point

When resuming this personal computer after it was suspended, resume it 10 or more seconds
after the last suspending operation.
The screen occasionally flickers during suspending/resuming operation.

Resuming with the SUS/RES switch
1

Press the SUS/RES switch for
resuming the personal computer.

As the SUS/RES switch is pressed, the

 mark of the status indicator LCD stops

blinking and continues lighting. This
indicates that the personal computer is
in the operating status.

SUS/RES switch

Resuming with the cover close switch
1

Fold out the LCD display.
The personal computer is resumed by the
cover close switch.

Latch

Critical Point

When the Lid Open Resume of the BIOS setup is set to “Disabled”, the personal computer
won’t be resumed by folding out the LCD display.

Summary of Contents for LifeBook S-4530















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands