Fujitsu LIFEBOOK E733 Operating Manual Download

Page: 66 / 86

Removing and installing components during servicing

Installing a memory module

►

Insert the memory module with the contacts
and the recess (a) facing the slot (1).

Memory expansion

Memory module

►

Carefully push the memory module
downwards until you feel it click
into place (2).

Attaching the cover

►

Place the cover in the correct mounting position (1).

►

Tighten the screw (2).

►

Complete the installation, see

"Finishing component removal", Page 64

Finishing component removal

After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:

►

Install the battery again (see

"Installing a battery", Page 34

►

Turn the notebook the right way up again and place it on a

at surface.

►

Reconnect the cables that you disconnected before.

Fujitsu

Summary of Contents for LIFEBOOK E733























































































Search results

Summary of Contents for LIFEBOOK E733

Reviews:

Related manuals for LIFEBOOK E733

Brands by name

Popular brands

Fujitsu LIFEBOOK E733, Operating Manual

Search results

Summary of Contents for LIFEBOOK E733

Reviews:

Related manuals for LIFEBOOK E733

Brands by name

Popular brands