Fujitsu LIFEBOOK E733 Operating Manual Download

Page: 45 / 86

Working with the notebook

Removing the SIM card

►

Prepare for removal of the SIM card, see chapter

"Preparing to remove components", Page 62

►

Press on the edge of the SIM card so that
it jumps up slightly out of the slot.

►

Pull the SIM card out of the slot in the
direction of the arrow (1).

►

Complete the removal, see chapter

"Finishing component removal", Page 64

Wireless LAN/Bluetooth/UMTS/LTE radio components

The installation of radio components not approved by Fujitsu will invalidate
the certi

cations issued for this device.

Switching the wireless components on and off

►

Press the

button to start the

WirelessSelector

The radio component indicator will be illuminated when one or more radio
components are switched on.

If you switch off the radio components, the wireless LAN antenna and the
Bluetooth and UMTS/LTE module will also be switched off.

You can enable and disable the installed radio components individually
using the

WirelessSelector

program.

Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.

You can

nd more information on how to use Bluetooth on the CD you

received with your Bluetooth software.

You can obtain more information on UMTS/LTE from your service provider.

Further information on WLAN and Bluetooth

For further information about WLAN or Bluetooth, see "Appendix: Miscellaneous Information".

Fujitsu

Summary of Contents for LIFEBOOK E733























































































Search results

Summary of Contents for LIFEBOOK E733

Reviews:

Related manuals for LIFEBOOK E733

Brands by name

Popular brands

Fujitsu LIFEBOOK E733, Operating Manual

Search results

Summary of Contents for LIFEBOOK E733

Reviews:

Related manuals for LIFEBOOK E733

Brands by name

Popular brands