manualshive.com logo in svg

Fujitsu Lifebook C340, Manual

Share
Download
Fujitsu Lifebook C340 Manual Download Page 45

Thr

ee

U s i n g   Y o u r   L i f e B o o k   C   S e r i e s

L i f e B o o k   C   S e r i e s   f r o m   F u j i t s u

29

INTEGRATED ERGOTRAC 
POINTING DEVICE

The ErgoTrac pointing device is composed of
a short, comfortable, dish-shaped pointing
device and two buttons located in front of the
keyboard. The ErgoTrac pointing device has 
the function of a mouse, and moves the cursor
around on the screen – up, down, left and right.
A light pressure with the tip of your finger is all
that is required to operate the ErgoTrac. The
more pressure you use the faster the cursor will
move. The second part of the ErgoTrac point-
ing device – the buttons – function as mouse
buttons, and the functions they perform
depend on the application you are running.
Figure 3-5 shows the position of the ErgoTrac
pointing device and buttons.

P O I N T

An external mouse can be connected to
the PS/2 port on the right side of the
notebook, and used simultaneously with
the ErgoTrac pointing device.

Figure 3-5 ErgoTrac pointing device

Right Button

Left Button

Cursor Control

Cursor

F 3 Using.qxd  10/27/98  1:58 PM  Page 29

Summary of Contents for Lifebook C340













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands