S e c t i o n F i v e
104
C A U T I O N
The memory upgrade module can
be severely damaged by electro-static
discharge (ESD). Be sure you are properly
grounded when handling and removing
the module.
Checking the Computer
Recognition of New Memory Capacity
When you have changed system memory
capacity by adding or removing a memory
upgrade module, be sure to check that your
notebook has recognized all of the memory.
You can check memory capacity by looking at
the Main menu of the setup utility:
1. Turn on power using the power switch.
2. Enter the setup utility by pressing the
F2
key
as soon as the Fujitsu logo appears on the
screen.
(See pages 50-51.)
To Remove a Memory Upgrade Module:
1. Perform steps 1 through 4 of To Install a
Memory Upgrade Module.
2. Pull the clips sideways away from each
side of the memory upgrade module at
the same time.
3. While holding the clips out, remove the
module from the slot by lifting it up and
pulling towards the front of your notebook.
4. Store the memory upgrade module in a static
guarded sleeve.
5. Close the keyboard by following the instruc-
tions in steps 8 and 9 of the instructions
for To Install a Memory Upgrade Module,
or install a new memory upgrade module
and then replace the cover by following
the instructions in steps 5 through 9 of
the instructions To Install a Memory
Upgrade Module.
The memory upgrade module is not something
you routinely remove from your notebook.
Once it is installed, you can leave it in place
unless you want to increase system
memory capacity.
C A U T I O N
Before you install or remove the memory
upgrade module, save changes and close
all files and turn power off to your note-
book. (
See Power Off on pages 20-21.
)
H 5 User Installable.qxd 10/27/98 2:11 PM Page 104
Summary of Contents for Lifebook C340
