manualshive.com logo in svg

Fujitsu Lifebook C340, Manual, Page: 112 / 172

Share
Download
Fujitsu Lifebook C340 Manual Download Page 112

S e c t i o n   F i v e

96

SECTION FIVE

USER INSTALLABLE FEATURES

Your LifeBook C Series has a number of user
installable features:

■

A Battery bay on the underside of your note-
book allows you to replace the internal
Lithium ion battery with a second one.

■

PC Card slots in the left side panel of your
notebook allow you to install PC Cards,
IC memory cards (SRAM card) or Zoomed
Video cards (Slot 1 only).

■

A compartment under the keyboard of your 
notebook allows you to install a memory
upgrade module.

■

A microphone jack on the right side of
your notebook allows you to connect 
a mono microphone.

■

A stereo line in jack on the right side of your
notebook allows you to connect a sound
source such as a cassette recorder.

■

A headphone jack on the right side of your
notebook allows you to connect headphones
or powered speakers.

■

A PS/2 port on the right side of your note-
book allows you to connect an external
mouse, keyboard or numeric keypad.

■

A USB port in the back of your notebook
allows you to connect a Universal Serial 
Bus device.

■

An RJ-11 jack in the back of your notebook
allows you to connect a telephone line to the
internal modem.

■

A serial port in the back of your notebook
allows you to connect serial devices, such 
as RS-232C pointing devices or modems.

■

A parallel port in the back of your notebook
allows you to connect a parallel printer,
photo or text scanner, etc.

■

An external monitor port in the back of
your notebook allows you to connect an
external monitor.

This section describes how to install and remove
equipment for each of the expansion features.

H 5 User Installable.qxd  10/27/98  2:11 PM  Page 96

Summary of Contents for Lifebook C340













































































































































































Reviews:

No comments