manualshive.com logo in svg

Fujitsu Lifebook C340, Manual

Share
Download
Fujitsu Lifebook C340 Manual Download Page 166

A p p e n d i c e s

150

SRAM

Static random access memory. A specific
technology of making RAM which does not
require periodic data refreshing.

Status Indicator

A display which reports the condition of some
portion of your hardware. On your Computer
this is an LCD screen just above the keyboard.

Stereo (audio)

A system using two channels to process sound
from two different sources.

Stroke (keyboard)

The amount of travel of a key when it is pressed
from resting to fully depressed.

Suspend

To make inoperative for a period of time. Your
notebook uses various suspension states to
reduce power consumption and prolong the
charge of your battery.

SVGA

Super VGA.

VRAM

Video Random Access Memory. A memory
dedicated to video display data and control.

Write Protect

Prevent alteration of the binary state of all bits
in a storage media. Example: all information 
on a device such as a floppy diskette; a block 
of space in a storage media such as a partition
of a hard drive; a file or directory of floppy
diskette or hard drive.

XGA

Extended VGA.

Zoomed Video

A PC Card port which allows notebook PCs 
to deliver full screen broadcast quality video
through third party PC Cards, including 
TV tuners, video capture, and MPEG 
full-motion video.

S-Video

Super Video. A component video system for
driving a TV or computer monitor.

System Clock

An oscillator of fixed precise frequency which
synchronizes the operation of the system and 
is counted to provide time of day and date.

TFT

Thin Film Transistor – A technology for flat
display panels which uses a thin film matrix of
transistors to control each pixel of the display
screen individually.

UL

Underwriters Laboratories – An independent
organization that tests and certifies the
electrical safety of devices.

VGA

Video Graphics Array. A video display standard
originally introduced by IBM with the PS/2
series of personal computers.

K Appendicies.qxd  10/27/98  2:23 PM  Page 150

Summary of Contents for Lifebook C340













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands