background image

A p p e n d i c e s

96

Monaural

A system using one channel to process sound
from all sources.

MPU-401

A standard for MIDI interfaces and connectors.

NTSC

National TV Standards Commission. The 
standard for TV broadcast and reception for 
the USA.

Operating System

A group of control programs that convert
application commands, including driver 
programs, into the exact form required by a
specific brand and model of microprocessor 
in order to produce the desired results from
that particular equipment.

Parallel Port

A connection to another device through which
data is transferred as a block of bits simultane-
ously with a wire for each bit in the block and
with other wires only for control of the device
not for transfer of data.

MIDI

Musical Instrument Digital Interface. A stan-
dard communication protocol for exchange of
information between computers and sound
producers such as synthesizers.

Modem

A contraction for MOdulator-DEModulator.
The equipment which connects a computer or
other data terminal to a communication line.

MMX Technology

MMX technology is an Intel processor enhance-
ment that improves multimedia and communi-
cation applications. The Pentium processor with
MMX technology boasts three primary architec-
tural design enhancements: 57 powerful new
instructions specifically designed to manipulate
and process video, audio and graphical data effi-
ciently; Single Instruction Multiple Data (SIMD)
enabling one instruction to perform the same
function on multiple pieces of data; and more 
L1 cache for a total of 32KB.

Lithium ion Battery

A type of rechargeable battery which has a high
power-time life for its size and is not subject to
the memory effect as Nickel Cadmium batteries.

LPT Port

Line Printer Port. A way of referring to parallel
interface ports because historically line printers
were the first and later the most common
device connected to parallel ports.

MB

Megabyte.

Megahertz

1,000,000 cycles per second.

Memory

A repository for data and applications which is
readily accessible to your computer CPU.

MHz

Megahertz.

Summary of Contents for Lifebook B142

















































































































Reviews: