manualshive.com logo in svg

Fujitsu LIFEBOOK 990Tx2, User Manual

The Fujitsu LIFEBOOK 990Tx2 is a versatile laptop with an advanced touch screen display and powerful performance. Enhance your user experience by easily accessing the comprehensive User Manual. Download this invaluable resource for free from our website and optimize your usage of the Fujitsu LIFEBOOK 990Tx2.

Share
Download
background image

U s i n g   Y o u r   L i f e B o o k   9 0 0   S e r i e s

L i f e B o o k   9 0 0   S e r i e s   f r o m   F u j i t s u

39

C A U T I O N

If you reformat the internal hard drive
ALL information including the operating
system, applications software and data
will be erased. Unless data is copied to
floppy disks or other data storage media
it will be permanently lost. All software
will be need to be re-installed and data
files restored from your back-up disks.
See the operating system manual for
information on backing-up your data
files. The factory installed software,
including the operating system, can be
restored from the Recovery CD-ROM
which came with your notebook. It 
was in the accessories box when you 
purchased your notebook. 

(See Restoring

Your Pre-installed Software from CD-ROM
on page 149 for more information.)

Any

application software which you have 
purchased and installed will have to
be re-installed from the original source.
When doing a recovery remember that

you must allocate space for the Save-
to-Disk function if you have it enabled

(See Setting Up Your Save-to-Disk File
Allocation on pages 94–95 for
more information.)

Internal power management for your notebook
is controlled from settings made in the BIOS
setup utility, the application PowerPanel by
Phoenix Technologies,and the Windows 95
Control Panel. If no settings have been made in
PowerPanel or the Windows 95 Control Panel,
the BIOS settings will be used. The PowerPanel
and Windows 95 Control Panel options have
been pre-set at the factory and will be active
unless you disable them. Complete descriptions
of the BIOS setup utility parameters are found
in Section Three of this guide. Power manage-
ment parameters are covered under the Power
Savings menu. (See pages 96–101.)

Some particular power management para-
meters are only available for setup from one 
of these places, others can be changed in any
one of them.

POWER MANAGEMENT

Your LifeBook 900 Series has many features for
conserving power. Some power saving features
are automatic and have no user control, such
as those for the internal modem, while others
depend on the user setting the parameter to
best suit their operating conditions. Power sav-
ing features include: turning the display bright-
ness down,limiting the use of high power
devices, activating an appropriate power savings
profile,and putting your notebook in Suspend
mode when not actually performing an opera-
tion. As with all mobile,battery-powered com-
puters,there is a trade-off between performance
and power savings.

Summary of Contents for LIFEBOOK 990Tx2


















































































































































































































Reviews:

No comments

Related manuals for LIFEBOOK 990Tx2

Panasonic Toughbook SX2 Operating Instructions Manual preview
Toughbook SX2
Brand: Panasonic Pages: 40
Panasonic Toughbook CF-74CCB02BM Operating Instructions Manual preview
Toughbook CF-74CCB02BM
Brand: Panasonic Pages: 36
MSI GS65 Stealth THIN-053 Applications Manual preview
GS65 Stealth THIN-053
Brand: MSI Pages: 108
iBall CompBook Excelance-OHD Manual preview
CompBook Excelance-OHD
Brand: iBall Pages: 18
MAXDATA PRO 8100 IS User Manual preview
PRO 8100 IS
Brand: MAXDATA Pages: 44
jp.ik LEAPW501r Quick Manual preview
LEAPW501r
Brand: jp.ik Pages: 2
Acer Aspire 7741 Quick Manual preview
Aspire 7741
Brand: Acer Pages: 313
Dell Inspiron 9400 Service Manual preview
Inspiron 9400
Brand: Dell Pages: 56
Packard Bell EasyNote MZ Series Disassembly Manual preview
EasyNote MZ Series
Brand: Packard Bell Pages: 18
Packard Bell EasyNote LJ61 Service Manual preview
EasyNote LJ61
Brand: Packard Bell Pages: 202
Vadem Clio Service Manual preview
Clio
Brand: Vadem Pages: 106
Sony VAIO VGN-T160P Specifications preview
VAIO VGN-T160P
Brand: Sony Pages: 1
Sony VAIO VGN-T170P Specifications preview
VAIO VGN-T170P
Brand: Sony Pages: 1
Sony VAIO VGN-TT250N/B Specifications preview
VAIO VGN-TT250N/B
Brand: Sony Pages: 2
Sony VAIO VGN-TT290 Specifications preview
VAIO VGN-TT290
Brand: Sony Pages: 2
Sony VAIO VGN-SZ740N1 Specifications preview
VAIO VGN-SZ740N1
Brand: Sony Pages: 1
Sony VAIO VGN-T370PL Specifications preview
VAIO VGN-T370PL
Brand: Sony Pages: 2
Sony VAIO VGN-TT190EIR Specifications preview
VAIO VGN-TT190EIR
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands