manualshive.com logo in svg

Fujitsu LIFEBOOK 990Tx2, User Manual

The Fujitsu LIFEBOOK 990Tx2 is a versatile laptop with an advanced touch screen display and powerful performance. Enhance your user experience by easily accessing the comprehensive User Manual. Download this invaluable resource for free from our website and optimize your usage of the Fujitsu LIFEBOOK 990Tx2.

Share
Download
background image

S e c t i o n   T w o

28

they were installed and/or the AC or auto/
airline adapter was connected.

There is no memory effect on the Lithium ion
batteries, which means that you do not ne ed to
discharge them completely before recharging. A
single fully discharged Lithium ion battery will
charge in approximately three (3) hours when
your notebook is Off or in Suspend mode. The
charging time from fully discharged for two
Lithium ion batteries together, is approximately
5 hours when your notebook is Off or in
Suspend mode.Of course partially charged bat-
teries will not take as long to charge. The charge
times will be significantly longer if your note-
book is in use while the batteries are charging
(from approximately nine (9) hours for one
battery to approximately 15 hours for two
batteries with normal operating levels).

C A U T I O N

Using heavy current devices such as LAN
cards or frequent CD-ROM accesses may
prevent charging completely.

C A U T I O N

You may not be able to hear the audio
alarms if the volume control is set too
low or is turned off by either hardware or
software but you will still be able to see
the Battery Level indicator(s) flash.

Low Battery State

When the battery is running low, your note-
book beeps about every 15 seconds and the
Battery Level indicator(s) flash. If you do not
respond to the low battery alarm,the batteries
will continue to discharge until they are too low
to operate. When this happens there will be a
multiple beep alarm,the Battery Level indicator
will show dead battery, and your notebook will
go into Suspend mode to try and protect your
data as long as possible. Your power manage-
ment settings do not affect whether the dead
battery alarm level will send your notebook into
Suspend mode, it will not go to Save-to-Disk
mode. (Figure 2-3 on page 19.)

When the low battery alarm occurs you need to
save all your active data and put your notebook
into Suspend mode until you can provide a new
power source. You should provide this power as
soon as possible. The new power source can be
a charged battery or a power adapter, either AC
or auto/airline.

Summary of Contents for LIFEBOOK 990Tx2


















































































































































































































Reviews:

No comments

Related manuals for LIFEBOOK 990Tx2

EUROCOM W110ER Service Service Manual preview
W110ER Service
Brand: EUROCOM Pages: 102
Texas Instruments Extensa 570CD Maintenance Manual preview
Extensa 570CD
Brand: Texas Instruments Pages: 85
Sony VAIO VGN-SZ390 CTO Series Specifications preview
VAIO VGN-SZ390 CTO Series
Brand: Sony Pages: 2
Sony VAIO VGN-SZ381P Specifications preview
VAIO VGN-SZ381P
Brand: Sony Pages: 2
Sony VAIO VGN-SZ340 Specifications preview
VAIO VGN-SZ340
Brand: Sony Pages: 2
Sony VAIO VGN-SZ360P Specifications preview
VAIO VGN-SZ360P
Brand: Sony Pages: 2
Sony VAIO VGN-SZ281P/X Specifications preview
VAIO VGN-SZ281P/X
Brand: Sony Pages: 2
Sony VAIO VGN-SZ270P/C Specifications preview
VAIO VGN-SZ270P/C
Brand: Sony Pages: 2
Sony VAIO VGN-SZ260P/C Specifications preview
VAIO VGN-SZ260P/C
Brand: Sony Pages: 2
Sony VAIO VGN-SZ330P Specifications preview
VAIO VGN-SZ330P
Brand: Sony Pages: 2
Sony VAIO VGN-SZ240 CTO Series Specifications preview
VAIO VGN-SZ240 CTO Series
Brand: Sony Pages: 2
Sony VAIO VGN-SZ250P/C Specifications preview
VAIO VGN-SZ250P/C
Brand: Sony Pages: 2
Sony VAIO VGN-SZ230P/B Specifications preview
VAIO VGN-SZ230P/B
Brand: Sony Pages: 2
Sony VAIO VGN-SZ210P Specifications preview
VAIO VGN-SZ210P
Brand: Sony Pages: 2
Sony VAIO VGN-SZ220P Specifications preview
VAIO VGN-SZ220P
Brand: Sony Pages: 2
Sony VAIO VGN-SZ140PA Specifications preview
VAIO VGN-SZ140PA
Brand: Sony Pages: 2
Sony VAIO VGN-SZ110/B Specifications preview
VAIO VGN-SZ110/B
Brand: Sony Pages: 2
Sony VAIO VGN-SR599GKB Specifications preview
VAIO VGN-SR599GKB
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands