Fujitsu IP Pathfinder S, User Manual

Page: 10 / 28

1BEFOREUSES
DIGITAL TELEPHONE CONTROLS AND INDICATORS
＜FC782PA and FC782PB ＞
■ Face
Please see ＜FC782D ＞ .
FC782PA
FC782PA : DP/PB switch
FC782PB : P/MP switch
DP/PB Please set up the following switch
switch pursuant to analog network's contract
for the power outage.
(default：DP )
■ Bottom
◆ DP：Analog sending signal 20pps
◆ PB：Analog sending signal PB
FC782PB
P/MP Please set up the following switch
switch pursuant to INS network's contract
Recording jack
for the power outage.
Line code
Handset code
(default：MP )
◆ MP: Point to Multi Point
always-on / call-by-call
◆ P: Point to Point
FC782PA/PB's behave in power outage
■ FC782PA and FC782PB
・During the power outage, functions (display, extension to extension calls, etc.) other than making calls
and answering calls cannot be used.
・About FC782PA/PB's behave in the power outage during the call.
【When the power is lost】
If the power is lost during the call, the call will be broken. After a few seconds, you can hear the
dial tone of the analog / INS network.
【When the power is restored from the power outage】
If the power is restored during the call, the call will be disconnected.
After several tens of seconds, you can hear the internal dial tone.
・The call waiting service etc. of the analog/INS network cannot be used during power outage.
■ Only FC782PB
・Please set up following switch pursuant to INS network's contract for the power outage.
◆ MP : Point to Multi Point always-on / call-by-call (default)
◆ P : Point to Point
P/MP swicth's configuration becomes effective if you reactivate the telephone after you change it during
power recovery.
P/MP switch's configuration doesn't become effective if you change it during power outage, or after you
reactivate the telephone.
・The line length from DSU to FC782PB (via PBX) is 300 metre ( φ 0.5 cable). One INS network line can
connect only one FC782PB.
10