background image

Preface

ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®

6

Copyright 2010 FUJITSU LIMITED

P3AM-2922-05ENZ0

"Windows Server® 2003" represents the following products.

-

Microsoft® Windows Server® 2003, Standard Edition

-

Microsoft® Windows Server® 2003, Enterprise Edition

-

Microsoft® Windows Server® 2003, Standard x64 Edition

-

Microsoft® Windows Server® 2003, Enterprise x64 Edition

-

Microsoft® Windows Server® 2003 R2, Standard Edition

-

Microsoft® Windows Server® 2003 R2, Enterprise Edition

-

Microsoft® Windows Server® 2003 R2, Standard x64 Edition

-

Microsoft® Windows Server® 2003 R2, Enterprise x64 Edition

-

Microsoft® Windows Server® 2003, Enterprise Edition for Itanium-based Systems

-

Microsoft® Windows Server® 2003, Datacenter Edition for Itanium-based Systems

-

Microsoft® Windows® Storage Server 2003 R2, Standard Edition

-

Microsoft® Windows® Storage Server 2003 R2, Enterprise Edition

-

Microsoft® Windows® Storage Server 2003 R2, Standard x64 Edition

-

Microsoft® Windows® Storage Server 2003 R2, Enterprise x64 Edition

"Windows® 2000" represents the following products.

-

Microsoft® Windows® 2000 Server operating system

-

Microsoft® Windows® 2000 Advanced Server operating system

Other names

"Fibre Channel card" refers to the Fibre Channel interface module normally used by the 
server. A "Host Bus Adapter" (HBA) or "Channel Adapter" (CA) may be used instead, 
depending on the server.

"Fibre Channel cable" refers to the cable that is used to connect the ETERNUS Disk storage 
systems and server over a Fibre Channel interface. "FC cable", "optical fibre cable", or "multi 
mode Fibre Channel cable" may be used instead, depending on the storage system.

Italics are used to show variables such as values and characters that appear in command 
parameters and output examples.

Screen shot(s) reprinted with permission from Microsoft Corporation.

Copyright 2010 FUJITSU LIMITED

Summary of Contents for ETERNUS2000 model 100

































Reviews: