Chapter 2 Operating the Library
2.6 Maintaining the Library
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED
P3AM-8802-04ENZ0
52
3
Select a destination cell from the Destination Elements list.
4
Select the number of cycles.
5
Click Start Test.
End of procedure
2.6.1.5
Wellness Test
•
The wellness test exercises a general health check on the library functionality by running the following
partial tests:
-
Basic Hardware Review
-
Robotics Initialization Test
-
Barcode Scanning Test
-
Magazine/Mailslot Unlock Motor Test
-
Move Media Test
•
Running the test requires at least one drive and one tape carting in the library.
•
After the test has been started the Stop Test button is active. Clicking the button will abort the wellness test
but not before the current partial test has been completed.
•
The test operates over the whole library and does not take into account partition configuration.
•
During the test the library is off line.
•
The Info column notifies the user about the status and result of each partial test.
To run the system test, navigate to the Maintenance > Library Tests > Wellness Test screen, and then click
Start Test.
Figure 2.26 Wellness test
To run the system test, navigate to the Maintenance > Library Tests > Wellness Test screen, and then click
Start Test.
