Chapter 2 Operating the Library
2.6 Maintaining the Library
FUJITSU Storage ETERNUS LT260 Tape Library User’s Guide -Panel Operation-
Copyright 2016 FUJITSU LIMITED
P3AM-8802-04ENZ0
49
For service and diagnostics, use the robotic test.
To run the slot to slot test, navigate to the Maintenance > Library Tests > Slot to Slot Test screen, select the
number of cycles and click Start Test.
Figure 2.23 Slot to slot test
2.6.1.3
Element to Element Test
The element to element test moves a selected cartridge to a selected slot or tape drive, and then returns it to
the original slot. You can select the number of times to move the selected cartridge to the destination location
and back.
The element to element test is intended to show that the library is operating correctly. To diagnose problems
with the robotic assembly or verify that it has been correctly replaced, use the robotic test.
Figure 2.24 Element to element test
