Fujitsu ETERNUS DX60 S3 Configuration Manual Download

Page: 145 / 160

Change the status of all the disks with [Offline] to [Online]. In this case, change the status of Disk 1
through to Disk 8 to [Online].

After the status of the disks is changed to [Online], file systems and drive letters are assigned.

If any drive letter is unused, the unused drive letter is assigned in ascending order of the drive let-
ters, which results in discontinuous drive letters. Change the automatically assigned drive letter if
necessary.

Check if the file that was created in

Step 8

"■ Operation Disk Settings" (page 130)

"8.2.3.2 Disk

Settings" (page 130)

is displayed for the copy source drive.

Chapter 9 Advanced Copy Settings
9.2 Performing a Copy ()

145

FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)

P3AM-9002-01ENZ0

Summary of Contents for ETERNUS DX60 S3
































































































































































Search results

Summary of Contents for ETERNUS DX60 S3

Reviews:

Related manuals for ETERNUS DX60 S3

Brands by name

Popular brands

Fujitsu ETERNUS DX60 S3, Configuration Manual

Search results

Summary of Contents for ETERNUS DX60 S3

Reviews:

Related manuals for ETERNUS DX60 S3

Brands by name

Popular brands