System expansions
50
A26361-K690-Z220-1-7619, edition 1
Removing an optional port
►
Open the casing (see "Opening the casing").
►
Disconnect the cable from the connector on the mainboard.
►
Press on the locking lever in the direction of the arrow (1), unhook it and swing it up in the
direction of the arrow (2).
►
Remove the port from the slot (3).
!
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the cover plate.
►
Push the rear slot cover plate into the slot (4). Ensure that the point of the cover engages on
the outside of the casing.
►
Fold the lock closed in the direction of the arrow (5) and allow it to engage.
►
Close the casing (see "Closing the casing").
Summary of Contents for ESPRIMO E
