Fujitsu ESPRIMO E, Operating Manual

Page: 41 / 86

Troubleshooting and tips
A26361-K690-Z220-1-7619, edition 1 33
The floppy disk cannot be read or written
► Check that the write protection of the floppy disk or the floppy disk drive is activated (refer to
the "BIOS Setup" manual and if necessary to the manual for the mainboard).
► Check the relevant entries for floppy disk drive in the
Main
menu of the
BIOS Setup
.
► Check that the floppy disk drive controller is enabled (refer also to the manual for the
mainboard or in the "BIOS Setup" manual).
► Check that the cables of the floppy disk drive are properly connected (see "Replacing the
floppy disk drive").
Time and/or date is not correct
You can set the time and date in the
BIOS Setup
or in the operating system.
► Set the time and date.
i
If the time and date are repeatedly wrong when you switch on your PC, the on-board
battery is flat. Change the lithium battery as described in the "Extensions to the
mainboard"-"Replacing lithium battery".
Error messages on the screen
Error messages and their explanation are contained:
● in the manual for the mainboard
● in the "BIOS Setup" manual
● in the documentation for the programmes used
Restoring the hard disk contents
Should you need to restore your hard disk, the instructions are provided on the case of the
"Recovery CD" (delivered with your system).
Tips
Out of system resources
If you have too many applications running at once, you may experience problems due to a lack of
system resources.
► Close unnecessary applications.
Or
► Run the applications in a different order.
Other manuals
Additional manuals are provided as PDF files on the "User Documentation" or "Drivers & Utilities"
CD.