System expansions
Installing/removing a 3½" reader in a 3½" bay
(optional, SmartCard or MultiCard)
You can for instance install a SmartCard or MultiCard reader in the 3½" drive bay. The
reader is mounted onto a module holder when installed in the casing.
SmartCard or MultiCard readers can be mounted on a module holder (optional).
If you have ordered a device with a SmartCard or MultiCard reader, the module
holder, SmartCard or MultiCard reader are already built in on delivery.
If you have ordered a device without a SmartCard or MultiCard reader, a
blind cover is installed instead of the module holder.
Removing the module holder
•
Requirement: open the casing (see
"Opening the casing", Page 34
).
►
Disconnect the cables connected to the module holder.
1 1
2
►
Remove the screws (1) on the module holder.
►
Slide the module holder out of the casing in the direction of the arrow (2).
Fujitsu Technology Solutions
39
Summary of Contents for CELSIUS W520
Page 1: ...System Operating Manual CELSIUS W520 ...
Page 3: ......
