Fujitsu CELSIUS W520 Operating Manual Download Page 19

Page: 19 / 69

Getting started

Connecting external devices

Read the documentation on the external device before connecting it.

With the exception of USB devices, always remove all power plugs
before connecting external devices!

Do not connect or disconnect cables during a thunderstorm.

Always take hold of the actual plug when disconnecting a cable. Never pull the cable!

Connect and disconnect the cables in the order described below.

Cable connecting

►

Switch off all affected devices.

Cord

Cable

►

Remove power plugs from the mains outlets for all devices.

►

Plug all cables into the device and peripherals. Please make sure that you always
observe the safety notes provided in

"Important notes", Page 9

►

Plug all data communication cables into the sockets provided for the data
/ telecommunication networks.

►

Plug all power cables into the grounded mains outlets.

USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.

Additional information can be found in

"Connecting external devices to the USB

ports", Page 19

and in the documentation for the USB devices.

Disconnecting cables

►

Switch off all affected devices.

Cable

►

Remove power plugs from the mains outlets for all devices.

►

Unplug all data communication cables from the utility sockets.

►

Unplug all cables from the device and peripherals.

Fujitsu Technology Solutions

Summary of Contents for CELSIUS W520






































































Search results

Summary of Contents for CELSIUS W520

Reviews:

Related manuals for CELSIUS W520

Brands by name

Popular brands

Fujitsu CELSIUS W520, Operating Manual

Search results

Summary of Contents for CELSIUS W520

Reviews:

Related manuals for CELSIUS W520

Brands by name

Popular brands